Description
O’nestian * Gen 11
Our latest O’nestian offers the industry’s highest velocity of signal transfer and the industry’s lowest signal retention. A transient response must have speed, without lag, to be honest to the source.
(Amplification=) Adding electrons to a signal is a known disruptive process. We can view the waveform violently shaking, however once the agitators are removed by O’nestians transferring properties, the electron resolves into a calmer state. The second known is congested clumps of electrons; (heard as peak resonance.) O’nestians conduction design promotes even distribution of current flow while shifting resonance above 20k.
O’nestian creates a holographic marriage between transparency and musicality.
O’nestian is an industry-leading cable for all balanced devices. With 2x noise reduction the shielding will avoid hum for all cable lengths.
Sometimes what we hear isn’t necessarily lost, just presented out of linear order. O’nestian allows the original harmonics to align to it’s null position, because the electromagnetic current is no longer pushed out of position.
Studios usually mix in treated rooms, as a result, engineers tip up the brightness to cut through signal loss and room absorbed highs. However, Onestian factors this into the time domain. Achieving a more natural experience than what the engineer might hear, but this time the tonal response is better matched with yours…
O’nestian offers a measurable explanation correlating to University grade physics! What are you waiting for? O’nestian is the last XLR you will ever need to buy!
TECHNICAL INNOVATIONS
- Gold-plated copper connectors are three times more conductive than typical brass. Other exotic metal combinations have displayed signal error.
- Proprietary Conductors, with equal distance and spacing, each transferring the signal with maximum efficiency.
- Highly pure OCC copper removes grain boundaries that cause signal distortion. Carefully machined and designed for high VOP!
- Low-D Fiber insulates every conductor, measuring at a 1.3 dielectric; decreasing electromagnetic interference and increasing the speed of transfer.
- Outer jacket allows the cable to be lighter and more flexible than extruded PVC. It looks great and serves a higher electrical purpose.
- Optimized signal flow is the cleanest path for electron resistance.
Customer –
“AudioEnvy cables changed my belief in the difference cables make on sound. I heard a track played through the same system on other high-end cables before I heard the same track on AudioEnvy cables. That moment sold me. I now only track with my AudioEnvy XLR and 1/4″ cables both in the studio and on-location. It brings the sound I record to life. AudioEnvy captures the truest sound I’ve heard.”
~Seth Schaeffer, Hoptocopter Films, film production company
Customer –
I have wasted so much time in my life with gear. If only I found these cables 20 years ago. THANK YOU! THANK YOU! THANK YOU!
~ Steven stone, DJ
Customer –
This baby is a game changer!!!!!!!
Customer –
CABLES DO NOT MATTER! if,,,your deaf and/or never take the time to try an Audio Envy cable. Great job guys:)
Customer –
I never realized how much more monitors could offer. This is exciting stuff! I couldn’t be happier with giving them a chance!
Verified Customer –
Hi Audioenvy , given my current system of a VPI Classic/Musical Fidelity Nova II/Audio Research LS27 to Primaluna Prologue 6 Monoblocs the Audio Envy interconnects are bettering Audioquest, Kimber PBJ & KCAG, MIT, and Signal Cable silver resolutions. Your interconnects and speaker cables paired with PS Audio AC5 power cables provides the best synergy with my system. I have no reason to change to anything else at this juncture.
Thank you for providing a superior product at a reasonable price point.
Captain –
***EDITOR NOTE**
The reviews before 2019, are of previous generation. The O’nestian 5:3 is a new design, built upon the lessons of our former approach.
Thelor Vaneps (verified owner) –
This cable didn’t disappoint. It’s very transparent with a welcomed little emphasis on the bass at least compared to my current cable. The highs are very good and the mids are so realistic. Voices are pure and real. It’s hard to make a case for replacing these cables with anything else.
Charles Jones –
I recently purchased several of your cables from Lalit. Let me first say how transformable your cables have been my system has never sounded better it’s amazing!! Spacious holographic and just outright natural sounding. After Auditioning the power cords I proceeded to replace all the cables in my system and I couldn’t be more pleased! Definitely one of the best values in Audio! Power Cords, RCA’s, Interconnects, Xlr Balanced cables have all been replaced with Audio Envy cables. Anyone reading this should not hesitate to try them. Grateful to you! Sincerely, Charles Jones.
Captain –
Admin note: We have finally done it! The O’nestian * Gen 10 is as accurate as the G:L with no risk of Noise! There is a touch more musical richness, allowing the tones to convey wet and dry sounds even more effective. We have a gorgeous new AE connector! We will update the website photo soon. This design is also the recent 3:4 but the numbers are similar to the 4:3 which is a different design.
Blake Cook (verified owner) –
After purchasing and receiving a matched pair of O’nestian interconnects form Audio Envy, I immediately unpacked the cables and hooked them up. After listing for just a few minutes I did notice a much more relaxed quality to the sound. Prior to installing the cables, I had noticed a bit of sibilance at certain frequencies and an “upfront” quality to the sound, which was probably the result of a new streamer/player/dac I had added to the system (which I am sure wasn’t playing well with the $10.00 cables I was using). Once I connected the new cables, however, the sound signature seem to become much more relaxed, as I mentioned – revealing the potential of my new set-up. Presently, I am in the process of burning-in the new cables. I am looking forward to hearing what happens as they mature!
Joel Bussey (verified owner) –
Replaced Kimber Kable Silverstreaks with these. The speed and efficiency are remarkable. This translates to more details coming out of the recording and helps to push your system to the max. Do yourself a favor and try them. Best I’ve heard. I no longer feel the need to try another interconnect ever again!
Terry F. (verified owner) –
Adding an equalizer between my dac and pre meant adding another pair of cables.I didn’t want to change the “flavor” of the sound but the brand I’m currently using is no longer available,so the search began for something that would play well with the others.The O’nestian was the only one that didn’t change the character of the system after trying several brands. The only thing different is the sound is slightly smoother and more refined while the sound overall remains the same when the equalizer is on or in bypass. Perfect.
Terry F. (verified owner) –
A second review of the O’nestian that was custom made, XLR output to RCA input from an equalizer to a preamp.All I can say is critical listening quickly fell by the wayside.Silky smooth with no loss of detail.It’s better than I’d hoped for and compliments my system perfectly.