Description

If you are using our prior versions of XLR cables or older Ocean power cords, than this SP-14 is an ideal fit for how the midrange timing will sit.  Other considerations, if your current sound sits forward in the midrange and you desire to bring it back, this is the speaker wire to get!  Tends to help single driver speakers and open baffles speakers, but really any speaker or system that is mid forward.

 

 SP-14 speaker wire! 
*A quantity of 1x includes a +- combined cable. Please select a quantity of 2x to accommodate the left and right speaker. 

If you are familiar with Audio Envy’s works, then you know that we strive for ultra low signal retention. Also known as energy waste.  There is benefits to this approach because the signal can behave with increased response.  AE measures lower than most competitors in capacitive waste.  However, induction is also an inhibitor of energy transfer.  It has long been the case that in order to achieve a better cap measurement, the induction measurement will un-wontedly increase….. Until today!   Audio Envy’s  SP-14 speaker cable has the lowest combination of induction and capacitance measurements of any known speaker wire on the market!   Did it result in a new level of phenomenal sound as never experienced before?  Well,,, according to our beta testers and my biased opinion, the answer is YES!   As crucial as this, what else is important?

AE exercises it’s relevancy to how music has been heard and mixed for decades.  We didn’t make a cable that only sounds good on 10 albums or a specific genre.  Designing a compatible speaker wire for a wide range of music, is the art of musicality.   There is no industry standard for this, nor is there an easy remedy.  However, decades of signal R&D along with owning a recording studio has increased our ability to use frequency based impedance, to mediate a more linear frequency transfer!  AE doesn’t offer a cable that “SEEMS LIKE IT’S CLEAR.”   Our tech doesn’t push the midrange vocals FORWARD.   Our tech doesn’t compress or roll off highs for a false sense of warmth.  We allow the electrical signal to quickly respond, so it may represent the intricate plot points that will soon be converted into air pressure. When we experience three dimensional air pressure, we experience a variation in timing, sections of smooth waves, up to tight spiky transient waves.  The spacing, the layers and timing of this information is the difference between experiencing an enriched musical structure, verses one that sounds stuck in the speaker.

 

AE’s  Banana and spade connectors allow for more contact with less resistance.  We are not aware of a better solution that offers performance characteristics, combined with suffice durability, at another cost or astute brand.

• The mouth opening of our current spade is 1/4″ wide with outer diameter of 1/2″.  This will fit most posts, but please check your gear and speakers before ordering.

 

*SP14 requires a dedicated ground. Please select the length of ground wire, that will make its way to the closest available AC ground outlet.  The ground wire will come off the source side of the speaker cable, (located at your amplifier.)  If you do not have an available ground outlet we can manufacture a substitution that will tap into an existing power cord.  If you do not wish to have a dedicated ground wire, then purchase our model 34 speaker wire instead.

 

 

*1.6 pf of capacitance per ft.

*Induction of .164 uH per ft.

*Ultra low EMI ribbon design.

*Low operating temperature at 1,200 watts.

*Velocity of propagation at 88% speed of light.

 

TECHNICAL INNOVATIONS 

1. Proprietary Conductor arrangement, transfers the signal with maximum RCL efficiency.
2. Highly pure OCC copper removes grain boundaries that cause signal distortion.
3. Low-D Fiber insulation decreases energy loss
4. Outer jacket allows the cable to be lighter and more flexible then extruded PVC. It looks great and serves a higher electrical purpose.
5. Optimized signal flow provides a wider linear path through frequency impedance alignment.
6. Copper based gold connectors are similar in conductivity to our source wire. Other metal combinations have displayed signal reflections.